PROJECT DESCRIPTION Kirby was appointed as the main mechanical and electrical contractor on a 60MW hyperscale data centre project in Dublin for a leading cloud computing provider. Project Aries involved the construction of two new data centres including commissioning to level 3 and support to client during level 4 and 5. Challenging deployment dates drove …
PROJECT DESCRIPTION Kirby was appointed to complete the retrofit network upgrade on this hyperscale data centre project. The project involved the retrofit and upgrade of an existing data centre building to accommodate a proprietary higher bandwidth topology and upgrade of the building by increasing power and cooling requirements. Works were completed in a live facility. …
PROJECT DESCRIPTION Kirby was appointed to complete the mechanical and electrical scope of works for phase 1 of the new data centre facility. Large scale off-site fabrication was utilised on this project which ensured the project was delivered on schedule and to the highest safety and quality standards. SCOPE OF WORKS Kirby was responsible for …
PROJECT DESCRIPTION Kirby was appointed as the main mechanical contractor on a hyperscale data centre project in Sweden for a leading cloud computing provider. Project Celsius involved the construction of two new data centres. The mechanical scope of works included supply and install of 25,000m² of ducting to data halls, treated humidifier water system generation …
PROJECT DESCRIPTION Kirby was responsible for the mechanical and electrical scope of works for a new engineering building and cooling upgrade to an existing Data Centre. The project involved the construction of the new building facility whilst simultaneously carrying out critical cooling upgrades to their live European Headquarter Data Centre and maintaining 100% resilience at …
PROJECT DESCRIPTION Kirby was responsible for the delivery of full MEP services for a new 4MW Tier III data centre facility in West Dublin. The project involved the construction of a single storey data centre with services above and plant at roof level, an ESB substation as well as a three-storey office block. The project …
PROJECT DESCRIPTION Telecity Group were converting an existing warehouse facility in Dublin to a 6MW Tier 3 designed Data Centre and Kirby was appointed as lead design and build MEP contractor, with manpower peaking at 120 people. Kirby also led the 3D model development and coordination for the project. We utilised Autodesk Naviswork and Revit …
PROJECT DESCRIPTION Kirby completed the Civil, Structural, Architectural, Mechanical and Electrical works for a multinational blue chip client on a live Data and Disaster Recovery Facility in West London increasing the IT capacity to 6MWe. Due to the location of the project being within a conservation area and the building being grade 2 listed it …
PROJECT DESCRIPTION Kirby was appointed as the main mechanical and electrical contractor for a data centre expansion project in Slough, England. This project involved the expansion of an existing data centre facility and the introduction of a new switchroom, 27 CRAH units and 12 PDU’s. Kirby successfully integrated all services in a live environment with …
PROJECT DESCRIPTION Kirby was appointed as the main mechanical and electrical contractor for a data hall in a new facility for a leading data centre provider. Kirby applied Building Information Modelling (BIM) throughout this project and implemented Lean construction principles. All pipework was successfully prefabricated off-site, this optimised project delivery and ensured efficiency. SCOPE OF …
PROJECT DESCRIPTION Kirby was appointed to complete the turnkey design and build from RIBA Stage 3 involving the CSA and MEP fit-out of an existing suite within a live data centre. The project involved the integration of services within a live facility, modifications to existing owner furnished equipment and the supply and installation of new …
PROJECT DESCRIPTION This high density Tier 2 data centre solution for Ericsson was delivered entirely as a modular build. Kirby was responsible for the M&E project delivery, including model coordination and off-site manufacture of the containerised data centre, all associated civil works and complete integrated systems testing and commissioning. Kirby prefabricated modularised switch rooms and …
PROJECT DESCRIPTION Kirby was appointed to complete the mechanical, electrical and CSA scope of works for upgrade works to the existing cleanroom manufacturing area within the Zoetis facility. The project involved mechanical installations including WIFI cooling system and WIFI skid on the process pipework with alterations to the existing pipework, strip out of existing electrical …
PROJECT DESCRIPTION Kirby was responsible for the installation of all electrical services at the new MSD facility CUB (Central Utilities Building), MS & T Lab, Warehouse, Fallow Fit-out and external locations. The new facility plays a key role in the manufacture of biologics-based medicines. Off-site fabrication was utilised on this project which ensured that the …
PROJECT DESCRIPTION Kirby was appointed to complete the mechanical, electrical and CSA works for a new clean room at an existing biotech facility producing a range of animal health vaccines. Works included the demolition of existing clean room wall partitions and installation of new clean room with reconfiguration including associated HVAC, lighting and utilities; new …
Kirby has completed a number of projects for Alexion Pharmaceuticals at their facilities in Westmeath and Dublin, Ireland. The total value of projects completed for Alexion by Kirby is €35m. Please see below details of two recent projects that Kirby has completed for Alexion. Alexion Pharmaceuticals BDS, CUB and Warehouse, Ireland MAIN CONTRACTOR: PM …
PROJECT DESCRIPTION Kirby was appointed as the MEP contractor for a new production capacity expansion for GSK. This project was a combination of new build external areas and building extensions to existing production areas, all undertaken within a live production environment with ATEX/hazardous area zoning. Our work-scope included the fabrication and installation of piping, ductwork …
PROJECT DESCRIPTION Kirby was appointed as the main mechanical and electrical contractor for a Life Sciences facility upgrade. Kirby was responsible for the installation and commissioning of mechanical and electrical services and BMS upgrade in 2 new labs, workshops and administration areas. Craft on site peaked at 110. Kirby implemented LEAN construction techniques throughout the …
PROJECT DESCRIPTION Kirby was appointed as the mechanical contractor for a new manufacturing facility for Takeda Pharmaceuticals. The project involved the installation of mechanical and process pipework services in a new laboratory and office space, with total manpower peaking at 116. Kirby implemented Building Information Modelling (BIM) to coordinate project delivery and prefabricated all carbon …
Kirby has completed a number of projects for AbbVie at their facility in Sligo, Ireland. The total value of projects completed for AbbVie by Kirby is €10m. Please see below details of two recent projects that Kirby has completed for AbbVie. AbbVie Building 20, Ireland MAIN CONTRACTOR: Kilcawley Construction CONSULTANT: OSENG PROJECT: Buidling 20 – …
PROJECT DESCRIPTION This Mallinckrodt Pharmaceuticals project was a new bio-pharmaceutical facility built on an 11 acre greenfield site in West Dublin. Kirby was responsible for the installation and commissioning of all electrical and instrumentation services for the manufacturing building, utility building, admin building and R&D building, with total manpower peaking at 97. Kirby also managed …
PROJECT DESCRIPTION Kirby was responsible for all mechanical and electrical services associated with a new High Bay Warehouse Facility, including offices, QA/QC area, plantrooms and production area. Manpower on site peaked at 105. Kirby implemented Building Information Modelling (BIM) which ensured the project was successfully delivered and facilitated early client access. SCOPE OF WORK The …
Kirby has completed a number of projects for Allergan Biologics at their facilities in Westport and Dublin, Ireland. The total value of projects completed for Allergan by Kirby is €25m. Please see below details of two recent projects that Kirby has completed for Allergan Biologics. Allergan Biologics MAIN CONTRACTOR: Sisk CONSULTANT: RPS Engineering PROJECT: Biologics …
PROJECT DESCRIPTION Kirby was responsible for the full 3D coordination and construction of mechanical, electrical/instrumentation and process pipework services for this project, which was an extension of an existing manufacturing facility. The project consisted of a production suite and laboratory which included the installation of an extraction skid and evaporator skid. Kirby engaged with WSP …
PROJECT DESCRIPTION Kirby was appointed as the mechanical contractor for a new manufacturing facility for Janssen. This project involved the construction of a new building with a total floor space of 20,000m². In addition to this the existing warehouse, laboratory administration building, support infrastructure and utilities were also expanded to support increased manufacturing capacity. Kirby …
PROJECT DESCRIPTION Kirby was appointed as MEP contractor for the installation of a new production line for processing plasma products within an existing manufacturing facility. Kirby implemented LEAN construction techniques throughout the project and prefabricated CHW and LPHW pumps skids. This minimised interruption to the client and optimised efficiency. SCOPE OF WORKS Kirby scope of …
PROJECT DESCRIPTION Kirby was appointed to complete the mechanical, electrical and CSA scope of works for a new manufacturing facility and supporting utilities at Ortec Newcastle West in Limerick. Early contractor engagement, BIM and pre-fabrication was utilised to ensure the project was delivered safely and on time. SCOPE OF WORK Kirby was responsible for the …
PROJECT DESCRIPTION Kirby was responsible for the installation of mechanical services for a new industrial manufacturing facility in an existing warehouse. The facility included warehousing, indoor tanking for manufacturing, external tank farm and an external chiller yard. The existing building floor area was increased to accommodate the new facility mezzanine level AHU plant room. Fabrication …
PROJECT DESCRIPTION This project involved the complete remodelling of an existing production facility to accommodate Zimmer’s second manufacturing facility in Ireland. As principal contractor, Kirby had overall responsibility for design, engineering and construction services for the full fit-out of the new 100,000sq. ft manufacturing facility. Kirby employed Integrated Project Delivery (IPD) tools and Building Information …
PROJECT DESCRIPTION Kirby delivered full Mechanical, Electrical and Instrumentation and Process Piping services for a new purpose-built Adhesive manufacturing facility and had a significant involvement from project initiation right through to handover stage. Kirby worked closely with Fluor in bringing the principal M&E design from IFT stage to construction. This involved engaging with Fluor in …
PROJECT DESCRIPTION Brown Forman invested €44m in Slane Castle, County Meath. The investment included the construction of a new distillery, co-products building and visitors centre. Kirby was responsible for installation and commissioning of mechanical and electrical services within the distillery, co-products building and the visitors centre. Kirby implemented Building Information Modelling in order to successfully integrate …
PROJECT DESCRIPTION Kirby was appointed as the main mechanical and electrical contractor for Wembley Energy Centre. This energy centre is responsible for the distribution of heating to approximately 7,000 new homes. Kirby successfully managed the installation of key plant for this facility including 2 number 75,000 litre thermal stores, 3 number 9 MW boilers to …
PROJECT DESCRIPTION Wyeth Nutrition, an infant and maternal nutrition company which is part of Nestlé, has made an investment at its facility in Limerick as part of the New Card Project. Kirby was responsible for the mechanical and electrical services for the new production building, administration building and the existing operational plant. A key element …
PROJECT DESCRIPTION Kirby was appointed the main mechanical contractor for the warehouse and cleanroom installation for Meissner Filtration Products, manufacturers of medical devices. The project involved the successful pre-fabrication of the boiler room off-site which optimised project delivery and ensured efficiency. SCOPE OF WORK Kirby scope of works included the installation and commissioning of mechanical …
PROJECT DESCRIPTION Kirby was appointed to complete the installation of mechanical and electrical services for 2 nr. office blocks and basement car park at Crown Square Development. SCOPE OF WORKS Kirby was responsible for the mechanical and electrical scope of works. The electrical systems installed by Kirby included: MV Distribution LV Distribution Generator General & …
PROJECT DESCRIPTION Kirby was responsible for the installation of mechanical services for the project at George’s Quay, Dublin 2. The project involved alterations to the existing office and new fit-out installation of the second and third floors. This included all new mechanical services such as HVAC, Piping, Fire Suppression System and integration of the existing …
PROJECT DESCRIPTION Kirby was responsible for the upgrade of the mechanical and electrical services at the office development. The building consists of 10,000m2 over 4 levels with works completed on a live campus. The project was fully coordinated using BIM LOD500. A collaborative approach between Kirby and the design team eradicated any delays and gave …
PROJECT DESCRIPTION Kirby delivered full mechanical and electrical services on Adare Manor, a five star award-winning hotel redevelopment within a highly complex protected building structure. The labour on site peaked at 215 and the project involved works on 9 buildings – the redevelopment of existing manor house, construction of a new 90-bedroom wing, energy centre, …
PROJECT DESCRIPTION Kirby was contracted to undertake the complete mechanical and electrical services fit-out of 10,200m² commercial office space over 7 floors in a Dublin city centre location. The project also involved the fit-out of a 1MW data centre on the 1st floor with integrated systems testing (IST). There was a strong focus on LEAN …
PROJECT DESCRIPTION Kirby delivered full mechanical services as part of a multi million euro redevelopment at the Curragh Racecourse. The project included the installation and commissioning of mechanical services in the 10,500m² Grandstand, Museum, Café/Bistro and Energy Centre. Kirby acted as the Lead Building Information Modelling (BIM) Coordinator, this allowed us to coordinate services and …
PROJECT DESCRIPTION Kirby was appointed to complete the mechanical and electrical office fit-out to four floors. Each floor consisted of various sized meeting rooms and open plan desks. SCOPE OF WORKS Kirby was responsible for the mechanical and electrical scope of works. The electrical systems installed by Kirby included: LV Distribution General and Emergency Lighting …
PROJECT DESCRIPTION Kirby was commissioned to complete an office refurbishment in an existing office building, converting traditional office blocks into high security offices. Kirby was the Principal Contractor for the project overseeing and managing all aspects and disciplines. Five floors of 7,230m² office space were successfully converted and handed over for beneficial use. Included within the …
PROJECT DESCRIPTION Kirby was contracted to undertake the complete mechanical and electrical services fit-out of 11,000m² office space in an existing vacant office building on the IBM campus in Dublin, Ireland. As lead services coordinator, Kirby had to ensure that all high level services were completed to the highest possible standard. SCOPE OF WORKS Kirby …
PROJECT DESCRIPTION Kirby was responsible for the installation and commissioning of all mechanical and electrical services as part of a high end office fit-out for Autodesk, a leading design software and services company. This projected consisted of two seperate phases. Kirby utilised the expertise of our in-house design team and a 3D model was created …
PROJECT DESCRIPTION Kirby was responsible for the installation and commissioning of all mechanical and electrical services as part of a high end office fitout for the client. The project consisted of roof plant, 3 nr. office floors, MDF, IDF, kitchen services and basement. Kirby utilised the expertise of their in-house design team creating a 3D …
PROJECT DESCRIPTION Kirby was appointed to deliver complete electrical and controls/instrumentation services as well as full mechanical HVAC building services and electro-chlorination piping services for a new 431MWe CCGT gas fired power plant in Cork, Ireland. Kirby was also responsible for the detailed design of HVAC building services to conform to client functional specifications as …
Skip to content